Hertz HP3001

$1,249.99

D-Classs Mono Amplifier 3600 WRMS x 1 at 1Ω

Out of stock

SKU: HP3001 Category:

Description

Ch: 1 | 3600 W
HP 3001 is a D Class mono spl car audio amplifier, able to provide 6000W power for the subwoofer, and ensuring terrific performance if two of these amps are used to drive the front woofers (up to 500 Hz). The design of the printed circuit boards, the components featured on the output stage have been designed to comply with strict requirements of reliability, power and thermal dissipation. The wide array of possible setups, with by-passable Lo-Pass filter (24 dB/Oct. slope), subsonic filter, phase control and remote volume control, provides the ability to set HP 3001 in different systems; also, thanks to a Chain Mode function to cascade a second amplifier into a single load, 7200W power can be achieved with very high SPL levels.
sharethis-white sharing button
SPECS
ACCESSORIES
INPUT/OUTPUT
TECHNOLOGIES
DOWNLOADS
General Specs
Channels 1
Power supply voltage: 11 ÷ 15 VDC
Idling current (power ON/OFF): 2 A / 0.04 mA
Consumption @ 1 Ω, 14.4 VDC
(Max Musical Power): 150 A
Remote In: 7 ÷ 15 VDC – 1 mA
Distortion – THD (100 Hz @ 4 Ω): 0.1 %
Bandwidth (filter off): 10 ÷ 500 Hz
S/N Ratio (A weighted @ 1 V): 96 dB
Damping factor (100 Hz @ 4 Ω): 150
Pre-In sensitivity: 0.3 ÷ 5 VRMS (15 k Ω)
Load impedance (MIN): 1 Ω
Adjustable Crossovers no
Output Power
Output Nominal Power (RMS) @ 14.4 VDC, THD 1%:
1 Ch: 1200 W x 1 (4 Ω)
1 Ch: 2000 W x 1 (2 Ω)
1 Ch: 3000 W x 1 (1 Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
1 Ch: 1440 W x 1 (4 Ω)
1 Ch: 2400 W x 1 (2 Ω)
1 Ch: 3600 W x 1 (1 Ω)
Chain Power (RMS) @ 14.4 VDC:
2 Amp – Chain mode (1 Ch): 4000 W (4 Ω – THD 1%)
2 Amp – Chain mode (1 Ch): 6000 W (2 Ω – THD 1%)
2 Amp – Chain mode (1 Ch): 4800 W (4 Ω – THD 10%)
2 Amp – Chain mode (1 Ch): 7200 W (2 Ω – THD 10%)
Total Power RMS 3600 W
INPUTS / FILTERS
INPUTS: PRE IN
Filters On-Off: Yes
Lo-Pass: 50 ÷ 400 Hz @ 24 dB/Oct.
SUBSONIC (on/off): 25 Hz @ 24 dB/Oct.
PHASE (adjust): (0 ÷ 180) deg
Remote Volume Control (adjust): -50 ÷ 6) dB
Link Master-Slave: Yes
Physical Specs
Max size (mm / in.): 544 x 240 x 65,5
21.41 x 9.45 x 2.55
Weight (kg / lb.): 8,3 / 18.29

Additional information

Weight 5.00 lbs
Dimensions 5.00 × 5.00 × 5.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.