Hertz ML2803

$549.99

35 (1.38) mm (in.) | Tweeter | 180 W | 4 Ohm

3 in stock

SKU: ML2803 Category: Tag:

Description

To improve the car audio tweeters which was considered a reference since its first introduction into the market is a quite challenging task which could only be performed by a continued evolution in time and maximum care for each detail that might affect sound. From these presuppositions the Hertz ML 280.3 Legend car audio speakers has been born. Through the FEA simulations, the electro-acoustic designers carried out an extensive research which led to the optimization of the Tetolon dome geometry, to minimize distortion. This optimization method led to a reviewed face plate geometry for improved frequency response and lower distortion. Another element of the tweeter especially important for sound is the rear acoustic chamber: the designers performed an exhaustive research on the geometry as well as on the employed damping material, achieving 50% increase in overall volume, to extend response to lower frequencies with 900Hz resonance frequency.
sharethis-white sharing button
SPECS
FEATURES
DOWNLOADS
Component Tweeter
Size mm (in.) 35 (1.38)
Power Handling – Peak W 180
Power Handling – Peak Note (Hi-Pass filtered @ 1,8kHz – 12dB Oct.)
Impedance Ohm 4
Voice Coil Ø 28 (1.1)
Frequency Response Hz 1k – 28k
Magnet size D x d x h mm (in.) 27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12)
Weight of one speaker kg (lb.) 0,10 (0.22)
Magnet Neodymium
Dome Tetolon
Technical Specs
D mm 28
Re Ohm 3,3
Fs Hz 900
Le mH 0,013
Mms g 0,4
Cms mm/N 0,09
BL T*m 1,9
Qts 1,3
Qes 1,9
Qms 4
Spl dB 92
Electro-acoustic Specs
Physical Specs
A 53,4 mm 2.1 in.
B 48 mm 1.89 in.
C 29 mm 1.14 in
D 13,5 mm 0.53 in.
Frequency response
ML 280.3 LEGEND

Reviews

There are no reviews yet.

Be the first to review “Hertz ML2803”

Your email address will not be published. Required fields are marked *